MODULE / CABINETS
Wardrobe and cabinet design software
You have the measurements; the program does the rest. Type a width, a height, a depth and a shelf count, and MobiCAM builds the carcass, hangs the door, bores the hinge cups and produces the cut list.
01 / THE WIZARD
Type the size, see the cabinet
The custom-size wizard draws the cabinet it is about to add, while you are still typing. Fields on the left, that cabinet itself on the right. Change a number and the preview changes — "how will it look" is answered before you add it, not after.
- Width, height, depth, panel thickness
- Shelf count and spacing, drawer count, dividers
- Door count and hinge side
- Back panel, legs, plinth
02 / THE FRONT
Hinged, sliding, tambour or open
Changing the front changes how the cabinet is made, and the program knows that on its own. A sliding door has no hinges: no cups are bored, no hinges are billed, and the track hardware is billed instead. A tambour has no leaf at all; it is priced by the square metre.
- Hinged door — leaf count, hinge side, soft close
- Sliding door — overlapping leaves, top and bottom track
- Tambour shutter — no leaf, no boring, priced per m²
- Lift-up flap, push-to-open, larder, hanging rail
03 / STARTING POINTS
You do not have to start from nothing
There are ready presets for bedroom, living room and office: two-, three- and four-door wardrobes, sliding wardrobes, a five-drawer dresser, a nightstand, a TV unit, a bookcase. Drop one and change its size — there is no difference between a preset and a custom cabinet, because both go through the same builder.
- Wardrobes: 2/3/4 door, 2/3 sliding
- TV units: lowboard, media tower, open-shelf console
- Corner and curved bodies
- Face-frame and mullion construction
04 / DETAIL
What the cabinet module holds
| Carcass | Straight, corner, curved. Grooved back or screwed from behind. Legs, plinth, base. |
| Front | Hinged, sliding, tambour, lift-up, drawers, appliance housing or open. |
| Door style | Plain, Shaker, raised panel, beadboard, cathedral arch — with a per-m² upcharge. |
| Interior | Shelves, drawers, dividers, hanging rail, trouser rack, wine rack, plate rack. |
| Holes and grooves | Hinge cups, handle bores, shelf pins and the back groove — all of them go into the CNC file. |
| One builder | A preset, a cabinet you built in the wizard and a cabinet the AI proposed all go through the same code. There is no structural difference between them. |
NEXT
How does this cabinet get made?
Type the size, let the program do the rest
Free during the pilot. No credit card asked for.