01 / THE ROOM

The room first, then the cabinets

A kitchen does not sit in mid-air. You draw the room's plan by dragging its corners, place the door and the window on a wall and give them a height. Wall lengths are written live on the drawing, so the measurement you took with a tape is checked as you go.

Add, move and split corners and walls
Doors, windows and openings
Columns and beams — cabinets notch themselves around them
Import an existing floor plan as DXF

MobiCAM plan view: a room plan with its wall dimensions written on it — PLAN VIEW · WALL LENGTHS, LIVE

A U-shaped kitchen in 3D — U-SHAPED KITCHEN · PRESENTATION VIEW

02 / CABINETS

They snap to the wall and line up

You pick base, wall and tall units from a list and drop them into the room. A cabinet snaps to the nearest wall and abuts the one beside it; a corner unit seats into the corner. Change a width and the neighbour does not shift — the gap that is left closes.

Single and double door, drawers, sink base, corner, open shelf
Wall units: plain, glazed display, tambour, lift-up flap, plate rack
Tall units: pantry, oven housing, pull-out larder
The standard widths and heights used in Türkiye

03 / WORKTOP AND APPLIANCES

Worktop, sink cutout, island, breakfast bar

The worktop runs over the base units, turns an L at the corner and takes an upstand behind it. Place a sink or a hob and its cutout is made — and that cutout is not only for show: it goes to the shop drawing and into the CNC file as an interior contour.

Backsplash tiling, recessed niche and border
Island and breakfast bar; stools place themselves under a seating overhang
31 appliances: fridge, oven, hob, hood, dishwasher, wine cooler…
Handles, gola channel, LED and legs — all of them priced into the quote

The MobiCAM screen: project tree on the left, the kitchen in 3D in the middle, the cut list below — ONE SCREEN · DESIGN AND OUTPUT TOGETHER

04 / AUTOMATIC KITCHEN

From an empty room to a working kitchen, in one click

Once the room is drawn, "Automatic" lays base and wall runs along the walls, runs the worktop and puts the appliances somewhere sensible. What comes out is a draft — every cabinet can still be changed. You start from correcting rather than from nothing.

It builds the runs

Base and wall units along each wall, with a suitable solution at the corners.

It runs the worktop

Over the base run, turning at the corner, with its upstand.

It places appliances

Sink under the window, hob under the hood; all of them movable afterwards.

Then it is yours

The result is an ordinary design: every part of it can be edited by hand.

05 / IN THE BOX

What the kitchen module holds

Cabinet presets	50 ready cabinets: base, wall, tall, corner, sink base, drawers, glazed, tambour, lift-up, plate rack, wine rack.
Door styles	Plain, Shaker, raised panel, beadboard, cathedral arch. Glazed display doors and divided light. Curved and diagonal fronts.
Handles	Handled, gola (handleless channel), J-pull, push-to-open. The handle bore goes to the CNC.
Worktop	L-return, upstand, sink and hob cutouts. Backsplash tiling, niche, border.
Appliance library	31 kinds: built-in and freestanding, fridge and freezer, oven, microwave, hob, hood, dishwasher, washing machine, wine cooler, coffee machine, warming drawer.
Size standard	The width and height ladder used in Türkiye is defined inside the engine; the pickers step along it.

The drawing is done. What happens now?

PRODUCTIONCut list, nesting and CNC SALESPricing and the customer quote PICTURESRender gallery

Draw your next kitchen in MobiCAM

Free during the pilot. Ten minutes to install; fifteen to your first kitchen.

Start Free Manual

Kitchen design software